New Products from Heaters Controls And Sensors

Industrial Thermocouples and RTD Assemblies are manufactured using high quality contamination and chemical resistant mineral insulated RTD and thermocouple cable. Industrial Thermocouples and RTD Assemblies have higher temperature capabilities up to (3000ºF) and insure trouble free operation where with minimum failure.

Industrial Thermocouples and RTD Assemblies can be manufactured with a single sensor, dual or multipoint sensors and in various diameters from .010" to 1.125" in diameter with a large variety of termination's like explosion proof heads, FDA (food) Terminal Head or with leads and plugs. Most designs can be made for more information consult HCS.

Screw Plug Immersion Heaters are ideal for immersion min liquids, where space and connections are a problem.
Screw Plug Immersion Heaters are installed in medium to small size containers at pressures up to 3000 PSI. Watt densities from 90 Watts/sq. inch, Explosion Proof (NEMA 7), Corrosion Resistant (NEMA 4X), and General Purpose Terminal housings are available. A number of sheath materials like Titanium, Incoloy, Stainless Steel, Steel, and Copper can be used as required for specific applications. To guarantee sheath material and watt density compatibility with material or process being heated consult HCS.

• Accepts up to 2 thermocouple inputs and either J, K, T or E thermocouples
  
• Manually store up to 25 readings in non-volatile memory
  
• Two point field calibration; offset and slope for improved system accuracy
  
• T1/T2 differential
  
• Accuracy: ±0.7°F (±0.4°C) above -238.0°F (-150.0°C); plus ±0.1% of reading
• UL & cUL rated Intrinsically safe-Certified for Class I, Division 1; Groups A, B, C, and D hazardous (classified) locations
  
• Sealed Silicone rubber keypad
  
• Rated IP 54 for splash & dust resistance
  
• ABS/polcarbonate impact resistant case
  
• Fold out stand for bench top operation
  
• Meets CE requirements for electromagnetic compatibility
  
• Bright, easy to read LCD
  
• 3 year warranty
  
• Manufactured in U.S.A.

Wire-Mounted Electrical Current Indicators CR-45 series of provides an effective method of monitoring electrical current.

Wire-Mounted Electrical Current Indicators are attached directly to a current-carrying wire. When the current exceeds the turn-on point, the LED will illuminate to indicate the presence of current.