|
Canada
& USA Toll Free
1 800 279-9912
|
|
|
|
|
1/4 DIN Temperature
Controller Heat/Cool Controllers |
 FuzyPro
1/4 DIN Temperature Controller Heat/Cool Controllers can
easily be configured to provide precise control. The advanced
Smarter Logic "Fuzzy" allows processes to be controlled
better than ever before, with virtually no initial overshoot
or temperature variations.
As the control detects a process disturbance the fuzzy logic
continuous decision making function quickly returns the
process value to the setpoint. The large dual displays allow
the set point and process value to be visible at all times.
In addition self-diagnostic capabilities, sensor linearization
and cold junction compensation are all performed by the
powerful, single chip microprocessor. The 2" in panel depth
is the shortest of any similar function control available.
FuzyPro
1/4 DIN Temperature Controller Heat/Cool Controllers
Features:
•
Automatic tuning of PID parameters
• Selectable
input, heating and/or cooling outputs, degrees C or F
• 2 optional alarms, large displays 5/8" and 1 /2"
• Sealed mylar front panel, external lockout
• All control parameters adjustable from front panel
• Automatic/manual mode operation 2" in panel depth
FuzyPro
1/4 DIN Temperature Controller Heat/Cool Controllers
Specifications:
INPUT
| Thermocouple |
Type J,K,T,E,B,R,S,N.
(selectable) |
| RTD |
PT 100 ohm(DIN
or JIS) |
| Linear |
-10-60mV
Configurable input other voltage or current. |
| Display |
in temperature
or engineering units |
| OUTPUTS |
Single output
with 2 optional independent alarms
Heating and/or cooling outputs with 2 optional alarms
|
| Relay |
SPST relay
rated 3A, 240V maximum resistive load |
| Pulsed
Voltage |
32VDC, 20mA
maximum ohms |
| Current |
4-20mA,
0-20mA maximum load 500 ohms |
| Voltage |
0-10V minimum
load 500K ohms |
| Alarms |
8 selectable
modes each alarm
SPST relay(s) rated 2A, 240V maximum resistive load. |
CONTROL FEATURES
| Temp
Range |
Selectable Set Point:
-1999ºF - 3182ºF (-1128ºC - 1750ºC) |
| Alarm
Set Point |
Full Range Adjustable |
| Control
Modes |
Controls can be configured
as On/Off Proportional(P)
Proportional with manual reset Proportional/Integral(PI)
Proportional Derivative(PD)
Proportional/Integral/Derivative(PID) Heating and Cooling
Proportional Band:O-100% of span |
| Integral(Reset) |
0-3600 seconds |
| Derivative(Rate) |
0-1000 seconds |
| Anti-Reset
Wind-up |
Inhibits integral action
outside of proportional band. |
| Cooling |
Adjustable deadband
from -10 to + 10o/o of cooling proportional band |
| Manual
Mode |
Configurable as open
loop control should sensor no longer function |
| Cycle
Time |
0-120 seconds |
| Sensor
Break Protection |
Configurable status
of control and alarms |
| Control
Action |
Selectable-Direct action
for cooling Reverse action for heating |
INDICATION
|
Display |
4 digit
red 5/8" LED Process Value Display.
Green 1.2" LED Set Value display
Selectable decimal placement for normal or high resolution
display |
| Example |
0000, 000.0,
00.00 or 0.000 |
| F/C |
Selectable
with 2 LED indicators |
| Sample
Rate |
250 milliseconds |
| Power
Supply |
90-26OVAC,
50/60Hz C;consumption: less than 5VA |
| Data
Retention |
10 years
(EEPROM) |
| Control
Stability |
+/- 0.15%
of full scale |
| Accuracy |
-0.25% of
range: + -1 c or 0.5C in high resolution |
| Cold
Junction Compensation |
0.1% ambient |
| External
Resistance |
100 ohms
maximum |
| Common
Mode Rejection |
120dB |
| Normal
Mode Rejection |
60dB |
| Input
Impedance |
10M ohms |
| Operating
Temperature |
14ºF
- 122F (-10ºC-50C) |
| Humidity |
0-90% RH
(non-condensing) |
| Insulation |
20M ohm
minimum (5OOVDC) |
| Breakdown |
2OOVAC,5O/60Hz
1 minute |
| Vibration |
10-55Hz
amplitude 1 mm |
| Shock |
200m/c(20g) |
For
Quick Delivery
From Stock Call
CANADA
& USA TOLL FREE: 1 - 800 - 279-9912
|
|
