The
CR 4170/80 AC
Current Transducer Three Element is designed
for applications where AC current waveforms are
not purely sinusoidal. More precise and accurate
than other transducers, these devices are ideal
in chopped wave and phase fired control systems.
The CR
4170/80 AC Current Transducer Three
Element monitors AC current and produce a calibrated
4-20 mA or 0-5 V dc output signal.
CR 4170/80 AC
Current Transducer Three Element operates over
frequency ranges of 20 to 5K Hz and are available
in seven different input ranges. In addition, external
current transformers are available to extend the
measurement range. Response time is 250 ms and the
MTBF is greater than 100K hours.
A unique design feature of the new CR
4170/80 AC Current Transducer Three
Element allows mounting on 35 mm DIN rails or they
can be surface mounted with #5 screws.
CR 4170/80 AC
Current Transducer Three Element is calibrated
to +/- 0.5% accuracy at 60 Hz, and provides the
benefits of trouble-free service and precise measurements.
The window opening will accommodate a current carrying
wire up to 0.79” dia.
External power of 24V dc is required. Case size
is 2.9” high x 1.42” wide.
DIN
Rail or Panel Mount
Available
in 0 - 5 VDC or 4 - 20 mA DC output conf
The
CR 4170/80 AC
Current Transducer Three Element is designed
for applications where AC current waveforms are
not purely sinusoidal. More precise and accurate
than other transducers, these devices are ideal
in chopped wave and phase fired control systems.
