Thermistor
Thermometer from Barnant
- Selectable 0.1/0.01°F
or °C resolution
- Accepts YSI 400, 500*,
or 700 series thermistor probes
- Field calibration capability
minimizes probe errors
Thermistor Thermometer
from Barnant is ideal for both laboratory and field applications.
Meter features keypad selectable measuring scale (°F
or °C) and resolution (0.1 or 0.01°), and is accurate
to ±0.4°F (±0.2°C).
Thermistor Thermometer
rReadings are displayed on a large dual display (4-digit
LCD, 3/8"H; and 5-character alphanumeric, 3/16"H).
Open sensor, overrange, underrange, and low-battery indications
are also displayed on the LCD readout. Nonvolatile memory
stores factory and field calibration constants, currently
selected scale, resolution, peak and valley values probe
type, and up to 99 user-selected readings.
Thermistor Thermometer
eEasy-to-use function keys to help you with your measuring
applications. PEAK and VALLEY keys display the maximum
and minimum as well as the ambient temperature readings.
HOLD "freezes" the current reading. Use the
store function to store up to 99 readings in non-volatile
memory; press CLEAR to remove all readings from memory.
RECALL displays the average and the total number of stored
readings. Display stored readings (sequentially with their
sequence numbers) using the INC and DEC keys.
Use the DT function to
display the differential between present temperature and
temperature at the time the key was pressed. The differential
value is continuously updated until another key is pressed.
This feature is ideal for comparing two items that are
closely related in temperature or for monitoring small
temperature variations in a sample.
The microprocessor-based
Thermistor Thermometer features automatic or manual field
calibration. Calibrate the thermistor probe automatically
to either 32 or 212°F (0 or 100°C) or manually
to any known temperature within the range of the probe.
Rugged ABS plastic housing
protects meter against harmful chemicals. Splash resistant,
shatterproof display window and sealed membrane keypad
prevent dirt and moisture from damaging circuitry. One
9V battery (included) gives 100 hours of continuous operation.
Meter accepts one YSI 400, 500*, or 700 series thermistor
probe with 1/4" phone plug connector.
Thermistor
Thermometer Specifications:
Ranges:
YSI 400 series probe: -40.00 to
302.0°F (-40.00 to 150.0°C)
YSI 500 series probe*: -40.00 to
302.0°F (-40.00 to 150.0°C)
YSI 700 series probe: -40.00 to
212.0°F (-40.00 to 100.0°C)
Resolution: 0.1/0.01°F or °C switchable;
autoranging to 0.1° above 99.99°
Accuracy: ±0.4°F (±0.2°C)
Differential temperature accuracy: ±0.2°F
(±0.1°C)
Operating temperature: 32 to 122°F (0 to
50°C)
Operating temperature for stated accuracy: 59 to
95°F (15 to 35°C)
Dual display: 4-digit LCD, 3/8"H; ;and
5-character alphanumeric 3/16"H
Output: none
Power: one 9V battery (included)
Battery life: 100 hours of continuous operation
Low battery indication: yes
Probes: one YSI 400, 500*, or 700 series probe
with 1/4" phone plug connector (not included)
Dimensions: 31/2"W x 61/2"H x 11/8"D
Shipping weight: 1 lb (0.5 kg)
*To use YSI 500 series probes, set up the meter for
400 series probe and use the conversion chart supplied
with each 500 series probe.
|
Thermistor
Thermometer Ordering
Information
| 600-8525 |
Barnant
Thermistor Thermometer |
| 9376-04 |
Replacement
batteries, (9V Pack of four) |
Thermistor
Thermometer Carrying
Cases
| 8520-10 |
Clear
window case with adjustable strap. Protects meter
while in use. |
| 600-2827 |
Cordura
nylon carrying case. Holds one meter and one probe. |
