Platinum
RTD Thermometer
- Accurate to ±0.1%
of reading or ±0.7°F (±0.4°C), which
ever is greater.
- Field calibration capabilities
minimize probe error
- Stores up to 99 readings
- Features selectable
temperature scale and resolution
Our Platinum RTD Thermometer
performs like an expensive benchtop unit. Microprocessor-based
meter features keypad selectable measuring scale (°F
or °C) and resolution (0.1 to 1°). Choose an alpha
of 0.003850 a (DIN IEC 751) or 0.003916 a.
Platinum RTD Thermometer
Dual LCD gives you two measurements at once: the four-digit
upper display shows current reading while the five character
alphanumeric lower display facilitates setup, calibration,
or special functions. Nonvolatile memory stores factory
and field calibration constants; currently selected resolution,
scale and setup values; and up to 99 user-selected readings.
Platinum RTD Thermometer
has many easy-to-use functions help you with your measuring
applications: ALPHA displays your currently selected alpha
(3850 or 3916); CAL lets you calibrate the probe manually
or automatically to 32°F or 212°F (0°C to
100°C). HOLD "freezes" current reading in
lower display; PEAK and VALLEY display single high and
low points respectively.
Use DT to display the differential
between present temperature and temperature at the time
the key was pressed - dual display shows both readings.
STORE allows you to send up to 99 readings to memory.
RECALL displays average of stored readings; use the INC
and DEC keys to sequentially display stored readings.
Rugged ABS plastic housing
protects meter against harmful chemicals and hard use.
Features a built-in stand and a sealed keypad with a shatter-proof
display window. Powered by one 9V battery (included).
Meter accepts any 100W platinum RTD probe with the Barnant
three-pin connector; order probes separately.
NOTE: NIST traceability
is available when you order the Platinum RTD Thermometer
with our 100W platinum RTD probe. Inquire when placing
your order.
Range:
-330°F to 1560°F; -201 to 849°C (selectable)
Resolution: 0.1° or 1° (selectable)
to 999.9°, 1° above 999.9°
Accuracy: ±0.1% of reading or ±0.7°F;
±0.4°C (whichever is greater)
Repeatability: ±0.2°F
Probe: one 100W platinum RTD (not included);
three-pin connector
Display: dual LCD-upper is 4 digit, lower
is 5 character alphanumeric
Operating ambient: 50 to 104°F (10 to
40°C) for stated accuracy
Power: one 9V battery (included)
Battery Life: 200 hours
Low-battery indication: yes
Output: none
Dimensions: 31/2"W x 61/2" H x
13/16" D
Shipping weight: 1 lb (0.5 kg) |
Platinum
RTD Thermometer Ordering
Information:
| 600-9340 |
Barnant
Platinum RTD Thermometer |
| 9376-04 |
Replacement
batteries (9V. Pack of 4) |
Platinum
RTD Thermometer Carrying
Cases
| 8520-10 |
Clear
window case with adjustable strap. Protects meter
while in use. |
| 600-2827 |
Cordura
nylon carrying case. Holds one meter and one probe. |
Platinum
RTD Thermometer Adapters and Connectors
Use these adapters or this connector
to make your RTD probes compatible with the three-pin
connection on all the platinum RTD meters.
| 600-9350 |
Adapter;
ANSI three-pin miniconnector to three-pin connector. |
| 600-9352 |
Adapter;
ANSI three-pin standard connector to three-pin connector. |
| 2186-50 |
Connector.
Converts 2 or 3 wire probe with stripped wire ends
to three-pin connector. |
